Hackintosh install Guide

***The Olarila image is clean, without any mod with Clover bootloader, essentials kexts and patches, ALL inside Clover folder***

Hello ppl, let's start

Consider donating a small sum to help cover the costs of bandwidth, etc. Anything you can provide is appreciated, thanks!



*AMD users check here*



1- Download Olarila Image







*After Download, extract image











2- Format USB Stick









3a- Burn Olarila Image on MacOS/Windows/Linux with Etcher

*Download Etcher

https://www.balena.io/etcher/







*Open app and select extracted Image









*Select USB Stick(use 16gb USB stick)







*Burn Image







3b- Burn Olarila image on Windows with Win32DiskImager

*Download Win32DiskImager

https://sourceforge.net/projects/win32diskimager/

1- Format USB Stick







2- Open Win 32 Disk Imager







3- Load Olarila Image







4- Burn







4- Boot from USB



*Use a boot key(Gigabyte is F12, Asus is F8, etc)



*Select Boot MacOS Install from Olarila Image







*Notebooks users, if default config.plist fail use config2.plist, press O key in Clover boot screen, go to Configs







*Select config2.plist







5- Format SSD



*Select "Show All Devices"







*Format SSD, use APFS and go to installation







*After installation, boot from USB stick again, use boot key and select your SSD with system installed





6- Start a Post Installation

*Go to Olarila Image/Files folder and run "disablehibernate.command"







and "master-disable.command"







7- Copy Olarila EFI folder to EFI partition

*Download EFI folder for your Chipset









*You can use Olarila.app too









*Copy EFI folder to /Volumes/EFI







*Legacy mobos Install Clover bootloader again after replace EFI folder with boot0ss into ESP

8- Install Clover Bootloader in SSD

https://github.com/CloverHackyColor/...oader/releases

*Mobos UEFI, you don't need install Clover in Serie 8 Chipset+(Haswell+), just paste Olarila folder for your Chipset into ESP/EFI partition and reboot!







*Mobos Bios









*Reboot

9- Fine Tune, DSDT
Quote
DSDT (Differentiated System Description Table) is a part of the ACPI specification. It supplies information about supported power events in a given system. ACPI tables are provided in firmware from the manufacturer. A common MacOS problem is missing ACPI functionality, such as: fans not running, screens not turning off when the lid is closed, shutdown, boot fast without any ACPI error or warnings, sata, usb, firewire conflicts, etc. This can stem from DSDTs made with Windows specifically in mind, which can be patched after installation.

*Go to topic "DSDT patch requests" and read instructions, post your files there









*Paste edited DSDT.aml in Clover/Acpi/patched folder







*Reboot




Credits olarila.com